aluminium circle 1060 for cookware
Aluminium coil 6061 can be easily anodised where hard surface, good corrosion resistance and high strength are required. Its most important feature is could be delivered on the condition with low strength after quenching of solution treatment.
Product specification:
- Temper: T3-T8
- Thickness:0.3-150mm
- Width:200-2500mm, 1000mm, 1219mm
- Surface:Anodized,Polish,Mill finish,checkered,embossed,etching,etc
- Packaging Details:Interlayer paper with kraft paper, outer packing with wooden pallet or as your requirement.
Chemical Composition of our coil 6061:
| % | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr |
| Min | 0.00 | 0.00 | 3.80 | 0.30 | 1.20 | 0.00 | 0.00 | 0.00 | ||
| Max | 0.10 | 0.12 | 4.40 | 0.90 | 1.80 | 0.10 | 0.25 | 0.15 |
Typical Mechanical Properties of Aluminum coil 6061:
| Grades and status | Tensile strength
(25°C MPa) |
Yield Strength
(25°C MPa) |
Hardness force
500kg 10mm |
Elongation thickness
1.6mm(1/16in) |
| 6061-T651 | 310 | 276 | 95 | 12 |
Application:Mainly used in the manufacture of trucks, tower buildings, ships, cars,railway vehicles, furnitureand other pipe,rod, profile etc.
Related posts
